Fujitsu 6010N - fi - Document Scanner User Manual

6
fi-6010N Network Scanner Operator's Guide 345
6.6 Printing the Scanned Data
2. Select the print scale of the data.
By default, this is "100%".
z Shrink to Fit
The image is reduced so that the entire image fits into the area available for printing (area
inside the dotted line). Further enlargement is not possible.
If the positioning setting is "Center", the control point for printing is the center point of the
area available for printing. If the positioning setting is "Top Left", the control point for
printing is the top left corner of the area available for printing. For more details on the
positioning setting, refer to "6.6.2 Positioning" (page 349).
Print Sheet Scanned Data Positioning Result
Small Large Center
Top Left
Available Area
for Printing
Control Point
Center
Control Point
Top Left
Available Area
for Printing
Print Sheet
Scanned Data
Scanned Data
Scanned Data

Fujitsu 6010N - fi - Document Scanner Specifications

General

Brand	Fujitsu
Model	6010N - fi - Document Scanner
Category	Scanner
Language	English