6
fi-6010N Network Scanner Operator's Guide 403
6.10 Enabling/Disabling the Scan Viewer
Operations after scanning vary according to whether the "Scan Viewer" is set to "On" or "Off".
If sending an e-mail, scan operation proceeds as follows:
When "Scan Viewer" is "On"
and sending an e-mail
When "Scan Viewer" is "Off"
and sending an e-mail
On the "Send e-Mail" screen, press the [Scan]
button.
On the "Send e-Mail" screen, press the
[Scan&Send] button.
Documents are scanned.
The scanned data is shown on the "Scan
Viewer" screen and may be edited.
On the "Scan Viewer" screen, check and edit
the scanned data, and then press the [Send]
button.
The scanned data is sent as an e-mail attachment.
To Next Page
Loading...
