Fujitsu 6010N - fi - Document Scanner

414
2. Press the [Scan] button on the "Message Screen".
 Scanning starts.
Each page is briefly shown on the screen as it is scanned.
When the scan has completed, the "Scan Viewer" opens.
For more details about the "Scan Viewer", refer to "6.11 Editing the Scanned Data in the
Scan Viewer" (page 405).
3. Check the scanned data.
For more details about the "Scan Viewer" screen, refer to "6.11 Editing the Scanned Data in
the Scan Viewer" (page 405).
HINT
z When "Off" is set, the "Scan Viewer" is not shown.
z When a file name can be changed, the "File Name" screen is shown
before a scan. For more details, refer to "6.14.2 Changing a File Name
(for Save/e-Mail Attachment)" (page 419).
z When the setting of the "Scan Count" can be changed, the "Scan Count"
screen is shown before a scan. For more details, refer to "6.14.3 Check-
ing the Number of Sheets to Be Scanned" (page 420).