4.4 Setting up for Administrator Access via the Admin Tool
fi-6010N Network Scanner Operator's Guide 51
4
9. Select the target user(s), and press the [Next] button.
Follow the prompts of the install wizard windows until a "fi Network Scanner Admin
Tool has been successfully installed" message indicates that the installation has com-
pleted. Press the [Close] button.
When the installation is completed, logout of the scanner, and close the Web browser.
The Admin Tool should now be usable.
Select the [Start] button, select the [All Programs] - [fi-scanner V2] sub-menu, and then
select on the [fi Network Scanner Admin Tool].
To Next Page
Loading...
