GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-76 Section 3-9 - Configuration
3-9-3-3 Adjust Keyboard Backlight Intensity
• Press <CTRL> + L.
• Use the sliders in the Front Panel Lights Setup dialog box to adjust Backlight Intensity of the
Alphanumeric keyboard, Extended ultrasound keyboard, and/or Active keys, as required.
3-9-3-4 LCD Display Adjustment and Calibration
Adjustments may be made to the LCD Display, to control and calibrate the Contrast, Brightness,
and/or Blue Tint settings, as required.
For instructions, see LCD Display Adjustments and Calibration on page 6-2.
3-9-3-5 Keyboard Setup
1) Press <F2>, select Service Tab. The Select
Keyboard Setup dialog is displayed.
2) Click Keyboard Setup.
The Regional and Language Options dialog box is displayed, which has controls for the following,
described below:
- Regional Options - affects regional formatting of numbers, dates, times, etc.
- Languages - enables selection of the required language and methods used to enter text.
- Advanced - enables non-Unicode programs to display menus and dialogs in their native
language.
Figure 3-73 Keyboard Light Intensity Adjustment
Figure 3-74 Select Keyboard Setup
Adjust Backlight Intensity
As Required
Select Keyboard setup
To Next Page
Loading...
