GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-85
8-4-13 DVD Holder Replacement Procedure
8-4-13-1 Tools
Appropriate Phillips screwdriver.
8-4-13-2 DVD Holder Removal Procedure
1.) From below the Top Shelf, while supporting the DVD Holder with one hand, remove the four
retaining screws as shown in Figure 8-98.
2.) Remove the DVD Holder from the base of the Top Shelf.
8-4-13-3 DVD Holder Installation Procedure
1.) Working from beneath the Top Shelf, align the replacement DVD Holder in the correct position.
2) Return and fasten the four retaining screws as shown in Figure 8-98 to secure the DVD Holder
firmly in position.
Figure 8-98 DVD Holder Showing Two Retaining Screws
DVD Holder retaining screws (2
screws visible)
To Next Page
Loading...
