GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
5-28 Section 5-4 - Back End Processor
5-4-8 Left/Right Speakers
The L/R speakers are mounted on the front side of the bottom assembly. The audio signals are received
via a Jx connector connected to the Fan board - see Figure 5-19 on page 5-25.
Table 5-10 BEP Input DC Voltages
Input Description Connector - PIN# Connected From
EXT_DC 20 V DC from PS J17-1, 2, 3, 4, 5 PS
Battery Varies from 14 V to 16.7 V DC
depending on battery capacity.
Distributed via PS.
J17-11, 12, 13, 14, 15 PS
+12 V_BE DC voltage from PS
BE indicates Back End
J17-19 PS
5 V_STB DC voltage from PS
STB indicates Standby
J17-20 PS
+5 V_BE DC voltage from PS
BE indicates Back End
J17-21,22, 23, 24 PS
To Next Page
Loading...
