GE Vivid i n - AC Cable Hook Replacement Procedure

GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-65
8-4-4 AC Cable Hook Replacement Procedure
8-4-4-1 Tools
Appropriate Phillips screwdriver.
8-4-4-2 AC Cable Hook Removal Procedure
From the Upper Cover (rear), unscrew the four AC Cable Hook retaining screws (see Figure 8-74) and
remove the cable hook holder.
8-4-4-3 AC Cable Hook Installation Procedure
1.) Position the AC Cable Hook on the Upper Cover (rear) and return and fasten the four retaining
screws.
2) Proceed to perform the following functionality tests:
- SafeLock Cart - Grounding Continuity on page 10 - 23
- SafeLock Cart - Chassis Current Leakage Test on page 10 - 25
Figure 8-74 AC Cable Hook