GE Vivid i n - Completing the Hardware Installation; Connecting Printers

GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 3 - System Setup 3-21
Section 3-7
Completing the Hardware Installation
The hardware installation procedures described in this section provide instructions and information for
the possible scenarios, as follows:
• Vivid i n/ Vivid q N scanner but no SafeLock Cart - connections direct to the system
• Vivid i n/ Vivid q N scanner with SafeLock Cart
• Vivid i n/ Vivid q N scanner but no SafeLock Cart - connections via USB hub
3-7-1 Connecting Printers
3-7-1-1 Printer Connection and Configuration - Overview
NOTE: Before connecting a printer to the Vivid i n/ Vivid q N scanner, refer to the Safety and Environmental
Guidelines on page 1-9.
This section provides information common to all printers approved for use with the Vivid i n/ Vivid q N
ultrasound scanner, as follows:
• Printer Categories and Outline of Procedure Instructions, below.
• Configuring Hot Keys to Activate Printing Direct from the Control Panel on page 3-22.
• Configuring Printing Orientation (Portrait or Landscape) and Paper Size on page 3-23.
3-7-1-1-1 Printer Categories and Outline of Procedure Instructions
NOTE: The printers approved for use with the Vivid i n/ Vivid q N system are categorized in Table 3-11 below.
Refer to the appropriate instructions for connecting a specific printer, as applicable.
Table 3-11 Printer Categories and Connection Procedures
Printer Category Connection Procedure
Report Printer (Color)
• HP470 Color Printer on page 3-26
Report Printer (Color) with Network Capabilities
• HP Officejet Pro 8000 Color Printer on page 3-28
Video Printer (B&W)
• Sony UP-D897 B/W Video Printer on page 3-29
Video Printer (Color)
• Sony UP-D25MD Color Video Printer on page 3-33
• Sony UP-D23MD Color Video Printer
Refer to:
Sony UP-D25MD Color Video Printer on page 3-33