GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-88 Section 3-10 - Connectivity Setup
3-10-2 Physical Connection
3-10-2-1 Ethernet Switch Connections
An Ethernet Switch (P/N: 066E0741), is used to connect the Vivid i n/ Vivid q N system to an EchoPAC
PC and a network printer.
Figure 3-86 Ethernet Switch Identifications
Figure 3-1
Position Label Function
X
To PC
To connect an end station or a Server to the Port
=
To HUB
To connect a HUB or another Switch to the Port
Table 3-11 MDI Button Position Descriptions
MDI Button
Controls the fifth
connector, making it
crossed or non-crossed.
Informative LEDS
Ethernet Cable
connectors
To Next Page
Loading...
