GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 3 - System Setup 3-75
3-9-3 Service Screen Set-up
3-9-3-1 Overview
The Service Screen gives you access to:
• Select Video Format to be used by the VCR
• Select the VCR type
• Adjust LCD Display Contrast and Backlight Intensity
• Keyboard Setups
• Printer Setup
• Disable TCPIP filtering
NOTE: The Disable TCPIP Filtering option should only be used for Troubleshooting procedures, after which it
it is recommended to return immediately to the TCPIP Filtering enabled state.
3-9-3-2 Open Service Screen
1.) Press CONFIG
(F2) and log on as Adm, see Log On to the System as ADM on page 4-10.
2.) Select SERVICE
to view the Service Screen, see Figure 3-72 below.
Figure 3-72 Service Screen (Example)
To Next Page
Loading...
