GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
1-14 Section 1-4 - Product Labels and Icons
1-4-2 Label Descriptions
The following table shows label icons and symbols that may be found on the Vivid i n and Vivid q N
ultrasound unit and/or SafeLock Cart, and provides a description of each label’s purpose and location.
Table 1-8 Label Icons and Symbols - Description and Location 1 of 3
Label Name Description Location
Identification and Rating
Plate
Manufacturer’s name and location.
Date of Manufacture.
Model and Serial numbers.
Electrical ratings (Volts and Amps)
On the base of the unit
Type/Class Label Used to indicate the degree of safety or protection. Bottom panel of the adapter
"CAUTION" The equilateral triangle is usually used
in combination with other symbols to advise or warn
the user.
Various.
“ATTENTION - Consult accompanying documents”
is intended to alert the user to refer to the User
Manual or other instructions when complete
information cannot be provided on the label.
Various.
"CAUTION - Dangerous voltage" (the lightning
flash with arrowhead in equilateral triangle) is used
to indicate electric shock hazards.
Various.
Device Listing/Certification
Labels
Laboratory logos or labels that denote conformity
with industry safety standards, such as UL or IEC.
On the base of the unit
Indicates Equipment Type BF applied part for
medical equipment. Identifies a BF type applied
part complying with IEC 60601-1.
Probe connectors.
On the base of the unit
CE certification mark. On the base of the unit
Equipment Type CF IEC 60601-1 indicates
equipment having a floating applied part that
provides a degree of protection suitable for direct
cardiac contact.
Above the ECG inlet, ECG connector
and surgical probes.
Indicates compliance with UL safety standard UL
60601-1 Medical Electrical Equipment, Part 1
General Requirements for Safety.
On the base of the unit
To Next Page
Loading...
