GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-120 Section 3-10 - Connectivity Setup
3-10-6 Query/Retrieve (Q/R) Setup
3-10-6-1 Overview
The Query/Retrieve function makes it possible to search for and retrieve DICOM data from a DICOM
server for further analysis on the Vivid i n/ Vivid q N.
3-10-6-2 Query/Retrieve Setup on the Vivid i n/ Vivid q N
1.) Press CONFIG
(F2) and log on as Adm, as described in Log On to the System as ADM on page 4-10.
2.) Select Connectivity.
3.) Select Dataflow.
4.) Select Query Retrieve from the Name pull-down menu - see Figure 3-129 on page 3-121.
The selected dataflow (Query/Retrieve), is displayed as shown in Figure 3-128.
Figure 3-127 Select Query Retrieve
NAME
PULLDOWN
MENU
QUERY RETRIEVE
To Next Page
Loading...
