GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
8-148 Section 8-7 - Peripherals
Section 8-7
Peripherals
NOTE: This section provides references to the installation procedures for the various peripherals used with the
Vivid i n/Vivid q N portable ultrasound scanner. Connection to the system is via one of the USB ports
(unless otherwise stated) on the rear panel, as shown in Figure 8-149 below.
8-7-1 Connecting and Removing Peripherals
For detailed instructions on connecting peripherals to the Vivid i n/Vivid q N portable ultrasound
scanner, refer to the following procedure, as appropriate.
• USB Global Modem on page 3 - 34
• Wireless USB Network Adaptor on page 3 - 35
• DVD/CD-RW Drive on page 3 - 36
• MOD Drive on page 3 - 43
• External USB Hard Disk on page 3 - 44
For detailed installation and removal instructions, see External USB Hard Disk Replacement
Procedure on page 8 - 150
• USB Memory Stick on page 3 - 45
• Connecting the VCR on page 3 - 48
Figure 8-149 Vivid i n/ Vivid q N Rear Panel
To Next Page
Loading...
