GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-22 Section 3-7 - Completing the Hardware Installation
3-7-1-1-2 Configuring Hot Keys to Activate Printing Direct from the Control Panel
1.) Press Config (or F2).
2.) Select Connectivity (in the lower part of window).
3.) Select the Additional Outputs tab.
4.) From the Button drop-down menu (see Figure 3-13), select to configure either the Print button or
Alt+Print to activate a variety of outputs.
5.) Use the left or right arrows below to add any of the available options (listed on the left) as Outputs
(listed on right).
6.) From the listed Outputs, select (highlight) the required output, right-click and select Properties to
configure the output device accordingly.
Printing may now be activated direct from the Vivid i n/ Vivid q N Control Panel, using the hot key
you have configured for this purpose.
7.) Proceed to perform the B/W and Color Printer Test on page 4-29.
Figure 3-13 Configuring Control Panel Hot Keys for Printing
To Next Page
Loading...
