GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 3 - System Setup 3-23
3-7-1-1-3 Configuring Printing Orientation (Portrait or Landscape) and Paper Size
To change the printing orientation and printing paper size, configure the printer as described below.
To configure printers for portrait/landscape printing, the change must be performed at the Windows
operating system level. The user first accesses the system at the Applications level from the Additional
Outputs screen. By selecting the Advanced option under Selected Devices, the user accesses the
Printer Properties dialog box and proceeds with the configuration procedure as explained below.
An additional procedure is required to configure the Sony UP-D897 Printer. This is described in
Configuring the Sony UP-D897 Printer on page 3-30.
1.) On the system console, press Config and select Connectivity.
2.) From the Additional Outputs screen under Selected Devices, select Advanced...
Figure 3-14 Advanced option at Windows level
Selected Devices
Select Advanced
To Next Page
Loading...
