GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
3-26 Section 3-7 - Completing the Hardware Installation
3-7-1-2 HP470 Color Printer
The DeskJet Color Printer connection in the different scenarios is explained below.
• Connection via LAN
There are a few DeskJet Color Printers that can be connected to the system via LAN - refer to Add
Printer on page 3-80. The DeskJet Color Printer can be connected to an external, non-isolated
power source.
WARNING Do not attempt to use a different type of DeskJet Color Printer (brand or model) other
than the DeskJet Color Printer provided by GE Medical Systems. The ultrasound system is an
extremely sensitive and complex medical system. Any unauthorized peripherals may cause
system failure or damage!
NOTICE
IMPORTANT Do not connect the DeskJet Color Printer to the Vivid i n/ Vivid q N system while
scanning is in progress!
NOTICE
IMPORTANT During Stand-by mode, it is NOT recommended to introduce or remove USB
devices; this may cause the system to lock-up during the boot-up procedure.
Figure 3-18 DeskJet Color Printer
To Next Page
Loading...
