GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
4-18 Section 4-2 - General Procedures
4-2-9-2 Loading Presets from an MO Disk
Table 4-4 Loading Presets
STEP TASK FUNCTION
1.
Insert the MO disk with the archived
presets into the MOD.
2. Press Config (or F2); select Admin
then select Restore.
The Restore window is displayed.
3.
Enable the User Defined
Configuration check box.
4.
Select the MOD as the Source.
5.
Press Restore Now The Presets are restored to the System.
6.
Press <Alt> + E on the alphanumeric
keyboard.
The MO disk is ejected.
To Next Page
Loading...
