GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-119
6) To continue, type Y.
The following screen is displayed, showing the progress of the BIOS update process:
When the BIOS Update process is complete, the following message is displayed:
7) Press any key to restart the system.
The boot-up screen is displayed, as shown in Figure 8-124 on page 8-120.
Note: If the system does not restart, turn the power OFF, then ON. (In the event that the system
boot-up screen is not displayed, repeat the procedure, from step 1).
Figure 8-123 BIOS Update in Progress
To Next Page
Loading...
