GE HEALTHCARE
DIRECTION FQ091013, REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL
8-124 Section 8-5 - Software Loading
The message "Loading Tools please wait" is displayed, then the Service Tools Options menu
opens:
6) Do not select an option, but press <Ctrl> + C.
7) When the message "EMM386 is running. Available memory is limited to 32MB" is displayed, click
OK.
8) When the message "Terminate batch job (Y/N?)" is displayed, type Y.
9) At the prompt A:\> type pqmagic and press <Enter>.
The Partition Magic Screen is displayed, as shown below.
Figure 8-125 Partition Magic Screen
To Next Page
Loading...
