GeoVision GV-AS1010 User Manual

212
4. Open the browser and enter the controller default address: http://192.168.0.100
Figure 10-2
5. In the IP address field, give the controller an IP address that is NOT used by another
device, e.g. 192.168.0.XXX.
6. On the GV-ASManager, enter the following settings:
Controller ID: 1
Network: TCP/IP
IP: 192.168.0.XXX
Port: 4000
User: admin
Password: admin
Crypto key: 12345678
Figure 10-3

GeoVision GV-AS1010 Specifications

General

Brand	GeoVision
Model	GV-AS1010
Category	Controller
Language	English