Grandstream Networks UCM6204 User Manual

P a g e | 105
UCM6200 Series User Manual
• Click on to delete the model template or click on “Delete Selected Templates” to delete multiple selected
templates at once.
• Click on “Toggle Selected Template(s)” to toggle the status between enabled/disabled for the selected model
templates.
Model Update
UCM6200 zero config feature supports provisioning all models of Grandstream SIP end devices. Templates for
most of the Grandstream models are built in with the UCM6200 already. Templates for GS Wave and
Grandstream surveillance products require users to download and install under Web GUIValue-added
FeaturesZero ConfigModel Update first before they are available in the UCM6200 for selection. After
downloading and installing the model template to the UCM6200, it will show in the dropdown list for “Model”
selection when editing the model template.
• Click on to download the template.
• Click on to upgrade the model template. Users will see this icon available if the device model has
template updated in the UCM6200.
Figure 70: Template Management

Grandstream Networks UCM6204 Specifications

General

Brand	Grandstream Networks
Model	UCM6204
Category	PBX
Language	English