Security Settings
The UCM6200 provides users firewall security configurations to prevent certain malicious attack to the UCM6200
system. Users could configure to allow, restrict or reject specific traffic through the device for security and
bandwidth purpose. The UCM6200 also provides Fail2ban feature for authentication errors in SIP REGISTER,
INVITE and SUBSCRIBE. To configure firewall settings in the UCM6200, go to Web GUISystem
SettingsSecurity Settings page.
Static Defense
Under Web GUISystem SettingsSecurity SettingsStatic Defense page, users will see the following
information:
• Current service information with port, process and type.
• Typical firewall settings.
• Custom firewall settings.
The following table shows a sample current service status running on the UCM6200.
Table 11: UCM6200 FirewallStatic DefenseCurrent Service