Grandstream Networks UCM6204 User Manual

P a g e | 168
UCM6200 Series User Manual
SRTP
Enable SRTP for the VoIP trunk. The default setting is "No".
Sync LDAP Enable
If enabled, the local UCM6200 will automatically provide and update the local
LDAP contacts to the remote UCM6200 SIP peer trunk. In order to ensure
successful synchronization, the remote UCM6200 peer also needs to enable this
option on the SIP peer trunk. The default setting is "No".
Sync LDAP
Password
This is the password used for LDAP contact file encryption and decryption during
the LDAP sync process. The password must be the same on both UCM6200 peers
to ensure successful synchronization.
Sync LDAP Port
Configure the TCP port used LDAP sync feature between two peer UCM6200.
LDAP Outbound Rule
Specify an outbound rule for LDAP sync feature. The UCM6200 will automatically
modify the remote contacts by adding prefix parsed from this rule.
LDAP Dialed Prefix
Specify the prefix for LDAP sync feature. The UCM6200 will automatically modify
the remote contacts by adding this prefix.
CC Settings
Enable CC
If enabled, the system will automatically alert the user when a called party is
available, given that a previous call to that party failed for some reason.
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC
requests this channel can make. The minimum value is 1.
CC Max Monitors
Configure the maximum number of monitor structures which may be created for
this device. In other words, this number tells how many callers may request CC
services for a specific device at one time.
The minimum value is 1.
Table 53: Create New IAX Trunk
Type
Select the VoIP trunk type.
• Peer IAX Trunk
• Register IAX Trunk
Provider Name
Configure a unique label to identify this trunk when listed in outbound rules,
inbound rules etc.
Host Name
Configure the IP address or URL for the VoIP provider’s server of the trunk.
Keep Trunk CID
If enabled, the trunk CID will not be overridden by extension's CID when the
extension has CID configured. The default setting is "No".
Username
Enter the username to register to the trunk from the provider when "Register IAX
Trunk" type is selected.
Password
Enter the password to register to the trunk from the provider when "Register IAX
Trunk" type is selected.
Disable This Trunk
If selected, the trunk will be disabled.

Grandstream Networks UCM6204 Specifications

General

Brand	Grandstream Networks
Model	UCM6204
Category	PBX
Language	English