Grandstream Networks UCM6204 User Manual

P a g e | 302
UCM6200 Series User Manual
Announcements Center Settings
Table 104: Announcements Center Settings
Name
Configure a name for the newly created Announcements Center to identify this
announcement center.
Code
Enter a code number for the custom prompt. This code will be used in
combination with the group number. For example, if the code is 55, and group
number is 666. The user can dial 55666 to send prompt 55 to all members in
group 666.
Note:
The combination number must not conflict with any number in the system such
as extension number or conference number.
Custom Prompt
This option is to set a custom prompt as an announcement to notify group
members. The file can be uploaded from page ‘Custom Prompt’. Click ‘Prompt’
to add additional record.
Ring Timeout
Configure the ring timeout for the group members. The default value is 30
seconds.
Group Settings
Table 105: Group Settings
Name
Configure a name for the newly created group to identify the group.
Number
Configure the group number. The group number is used in combination with the
code. For example, if group number is 666, and code is 55. The user can dial
55666 to send prompt 55 to all members in group 666.
Note:
The combination number must not conflict with any number in the system such
as extension number or conference number.
Announcements Center feature can be found under Web GUIValue-added FeaturesAnnouncements
Center. The following example demonstrates the usage of this feature.
1. Click to create new group.
2. Give a name to the newly created group.
3. Create a group number which is used with code to send voice message.
4. Select the extensions to be included in the group, who will receive the voice message.

Grandstream Networks UCM6204 Specifications

General

Brand	Grandstream Networks
Model	UCM6204
Category	PBX
Language	English