Grandstream Networks UCM6204 User Manual

P a g e | 179
UCM6200 Series User Manual
Time Condition
Time Condition
Users could customize holiday time, office time or a specified time to allow the
outbound route to be used.
Outbound Blacklist
The UCM6200 allows users to configure blacklist for outbound routes. If the dialing number matches the blacklist
numbers or patterns, the outbound call will not be allowed. The outbound blacklist can be configured under UCM
Web GUIExtension/TrunkOutbound Routes: Outbound Blacklist.
Users can configure numbers, patterns or select country code to add in the blacklist. Please note that the blacklist
settings apply to all outbound routes.
Figure 109: Country Codes
PIN Groups
The UCM6200 supports pin group. Once this feature is configured, users can apply pin group to specific
outbound routes. When placing a call on pin protected outbound routes, caller will be asked to input the group
pin number, this feature can be found on the webGUIExtension/TrunkOutbound RoutesPIN Groups.

Grandstream Networks UCM6204 Specifications

General

Brand	Grandstream Networks
Model	UCM6204
Category	PBX
Language	English