Grandstream Networks UCM6204 User Manual

P a g e | 266
UCM6200 Series User Manual
Figure 177: Download Recording File from CDR Page
The above recorded call's recording files are also listed under the UCM6200 Web GUICDRRecording Files.
Figure 178: Download Recording File from Recording Files Page
Call Park
The UCM6200 provides call park and call pickup features via feature code.
Park a Call
There are two feature codes that can be used to park the call.
• Feature MapsCall Park (Default code #72)
During an active call, press #72 and the call will be parked. Parking lot number (default range 701 to 720)
will be announced after parking the call.
• Feature MiscCall Park (Default code 700)
During an active call, initiate blind transfer (default code #1) and then dial 700 to park the call. Parking lot
number (default range 701 to 720) will be announced after parking the call.
Retrieve Parked Call
To retrieve the parked call, simply dial the parking lot number and the call will be established. If a parked call is
not retrieved after the timeout, the original extension who parks the call will be called back.

Grandstream Networks UCM6204 Specifications

General

Brand	Grandstream Networks
Model	UCM6204
Category	PBX
Language	English