PMS INTEGRATION
UCM6200 series support Hotel Property Management System PMS, including check-in/check-out services,
wakeup calls, room status, Do Not Disturb which provide an ease of management for hotel applications. This
feature can be found on Web GUIValue-added FeaturesPMS.
Note: The PMS integration on UCM is currently supported only with one of the two following solutions.
HMobile PMS Connector
In this mode, the system can be divided into three parts:
• PMS (Property Management System)
• PMSI (Property Management System Interface)
• PBX
Grandstream UCM6XXX series have integrated HMobile Connect PMSI which supports a large variety of PMS
software providing following hospitality features: Check-in, Check-out, set Room Status, Wake-up call and more.
The following figure illustrates the communication flow between the PBX (Grandstream UCM6xxx Series) and
PMS software, which is done through a middleware system (HMobile Connect) acting as interface between both
parties.
Figure 191: UCM & PMS interaction
PMS Software
PMSI Middleware
To Next Page
Loading...
Need help?
General
