UCM6200 Series User Manual
• If set to “Yes”, users can skip entering the password when making outbound calls.
• If set to “By Time”, users can skip entering the password when making outbound
calls during the selected time condition.
• If set to “No”, users will be asked to enter the password when making outbound
calls.
Time Condition for
Skip Trunk Auth
If “Skip Trunk Auth” is set to “By Time”, select a time condition during which users can
skip entering password when making outbound calls.
Configure personal password when making outbound calls via trunk.
If enabled, this extension will be added to LDAP Phonebook PBX list; if disabled, this
extension will be skipped when creating LDAP Phonebook.
Select which Music On Hold class to suggest to extension when putting the active call
on hold.
Configure the maximum duration of call-blocking.
Table 42: FXS Extension Configuration ParametersSpecific Time
Click to add Time Condition to configure specific time for this extension.
Batch Add Extensions
Batch Add SIP Extensions
To add multiple SIP extensions, BATCH add can be used to create standardized SIP extension accounts.
However, unique extension user name can’t be set using BATCH add.
Under Web GUIExtension/TrunkExtensions, click on "Add” and select extension type as SIP extension,
and “add method” as Batch.
Table 43: Batch Add SIP Extension Parameters
Configure the starting extension number of the batch of extensions to be added.
Specify the number of extensions to be added. The default setting is 5.
Specify the interval between extensions as preferred when creating a batch of
extension.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Note: Users need to have the same level as or higher level than an outbound rule's
privilege to make outbound calls from this rule.
To Next Page
Loading...
Need help?
General
