UCM6200 Series User Manual
Enable Voicemail for the user. The default setting is "Yes".
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.
• User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
• Use Extension as Password.
• Enter a password to be used on all the extensions in the batch.
Configure Voicemail password (digits only) for the users.
• User Random Password.
A random password in digits will be automatically generated. It is recommended
to use this password for security purpose.
• Use Extension as Password.
• Enter a password to be used on all the extensions in the batch.
Configure CallerID Number when adding Batch Extensions.
• Use Extension as Number
Users can choose to use the extension number as CallerID
• Use as Number
Users can choose to set a specific number instead of using the extension number.
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
the global ring timeout setting under Web GUIPBX SettingsVoice
PromptCustom Prompt: General Preference. The valid range is between 5
seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout used is the
shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under Web GUICDRRecording
Files.
Skip Voicemail
Password
Verification
When user dials voicemail code, the password verification IVR is skipped. If enabled,
this would allow one-button voicemail access. By default this option is disabled.
Select which Music On Hold class to suggest to extensions when putting them on
hold.
To Next Page
Loading...
Need help?
General
