Grandstream Networks UCM6204 User Manual

P a g e | 109
UCM6200 Series User Manual
(3) Default Model Template
Default Model Template will be applied to the devices of this model. Default model template can be
configured in model template under Web GUIValue-added FeaturesZero ConfigModel
Templates page. Please see default model template option in [Table 30: Create New Model Template].
(4) Model Templates
Select a model template to be used for the device and click on to add. Multiple global templates
can be selected and users can arrange the priority by adjusting orders via and . All the selected
model templates will take effect. If the same option exists on multiple selected model templates, the
value in the template with higher priority will override the one in the template with lower priority. Click on
to remove the model template from the selected list.
(5) Customize Device Settings
This is the highest level configuration for the device. Click on “Modify Customize Device Settings” and
following dialog will show.

Grandstream Networks UCM6204 Specifications

General

Brand	Grandstream Networks
Model	UCM6204
Category	PBX
Language	English