UCM6200 Series User Manual
Select time condition for Call Forward Busy. The available time conditions are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or Holiday”
and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
• Office Time and Holiday could be configured on page System SettingsTime
SettingsOffice Time/Holiday page.
If enabled the extension will ignore all incoming calls
Select time condition for Do Not Disturb. The available time conditions are “Office
Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of Office Time or Holiday”
and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in terms of time
period.
• Specific time can be configured on the bottom of the extension configuration
dialog. Scroll down the add Time Condition for specific time.
Office Time and Holiday could be configured on page System SettingsTime
SettingsOffice Time/Holiday page.
If DND is enabled, all calls to this extension will be rejected except the numbers listed
on this list.
Note: The maximum number on the Whitelist is 10.
If call forward is enabled, all calls to this extension will be forwarded except the calls
coming from the specified numbers on this list.
Note: The Maximum number on the whitelist is 10.
If enabled, UCM6200 will automatically alert this extension when a called party is
available, given that a previous call to that party failed for some reason. By default,
it’s disabled.
Two modes for Call Completion are supported:
• Normal: This extension is used as ordinary extension.
• For Trunk: This extension is registered from a PBX.
The default setting is “Normal”.