Hillrom PST 300+ - Getting Information Online; Tools

Getting information online (Online Info System)
16
4990851_002_00 – 2082262 – 2022-01-10
2 Getting information online (Online Info System)
Trumpf Medizin Systeme provides additional important and up-to-
date information for the product range in electronic form on the
online information system.
Only authorised personnel have electronic access to the online
information system of Trumpf Medizin Systeme. The password for
access to the online information system is available from the
Technical Customer Service.
3Tools
Fastening parts with metric threads are installed in the PST 300
operating table.
Tools The following tools are required (and are not available from
Trumpf Medizin Systeme):
– Allen wrench set (1.5 mm to 10 mm)
– Open wrench set (8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19)
– Philips head screwdriver set (0, 1, 2, 3)
– Slotted screwdriver set (0, 1, 2, 3, 4, 5, 6)
–Socket wrench
– Side cutting pliers
– Nylon mallet
– Thickness gauge
–Pin remover
– Torque spanner
– 1 assembly levers
– Lifting aid for bolts
–Hot-air blower
The hot-air blower can be used to loosen an adhesive screw
guard by heating it.
– Clamping pliers
The clamping pliers may be used to position the bearing blocks
of the tabletop.
– Circlip pliers
Measuring
equipment
The following measuring equipment is required (and is not
available from Trumpf Medizin Systeme):
– Multimeter
–Ruler
– Cable inspection equipment
– Test device for electrical safety (such as Secutest SIII or Rigel
62353+)