Hioki 8730-10 - Page 52

36
_____________________________________________________________________________________________
3.2 Basic Measurement and Setting
______________________________________________________________________________________________
Configure
Time/DIV 200ms
Shot 10 DIV
Time Zoom X1
Format Single
Average OFF
Overlay OFF
Info (Left) Gauge (CH1)
Info (Upper) OFF
Auto Save OFF
Unit (CH1)
Range 1V
Coupling DC
Filter OFF
Zoom X1
ZeroPos. +50%
Wave Red
Graph (Not selectable)
Scaling OFF
Variable OFF
Comment (Blank)
Trigger
Trigger Mode Repeat
Pre-Trigger 15%
Trigger Source OR
CH1 Level
-Level 0 V
-UP
-Filter: OFF
External OFF
Timer OFF
Example 4) Detect overshoot and undershoot.
1. Connect the output terminal to be measured to the input terminal (CH1) of the 8730-10, 8731-
10.
2. Set the measurement parameters.
3. Set the input parameters.
4. Set the trigger parameters.