HITEC Aurora 9X - REVO MIX (HELI); Revolution MIX

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
REVO Mix (HELI)
Revo mix is not used when a modern heading hold gyro is installed in the heli. The heading hold function of the gyro will
correct the issue.
{{
Tip
Switch Option
c. To select a 2 or 3 position switch that will allow multiple values, press NULL and follow the switch activation process on page 68.
d. The default rate for the mix is 30%. Change the
value by lowering and raising the throttle to
highlight the high or low positions.
e. Change the value with the +RST- icon. Note
how the mix movement changes are shown on
the graph.
f. Press the Exit icon to exit back to the model
menu.
a. Select REVO Mix from model menu.
b. Press ACT to activate the REVO Mix menu.
Switch type Function
2 or 3 position Multiple values
Revolution Mix.
Revo, or revolution mixing is used to dampen the torque created by the main rotor speed and pitch variations
during ight.
### This function can be inuenced by the ight condition feature ###
139