HITEC Aurora 9X - Maxima Series Receiver Link (ID-Setting); Maxima Series Receiver Link (ID-Setting or Bind)

9 CHANNEL 2.4GHz AIRCRAFT COMPUTER RADIO SYSTEM
Hitec 2.4GHz Maxima Series Receiver
Your Hitec AFHSS system uses a communication protocol that links and binds the Hitec 2.4GHz receiver to your transmitter. Once the
receiver and transmitter are “bound”, no other transmitter can interfere with your receiver during its operation. In the case of multiple
model memory transmitters, you can bind as many Hitec 2.4GHz receivers to your transmitter, one per model memory as necessary.
Each transmitter and receiver set is paired at the factory for your convenience.
Use one of the following binding methods to bind additional Hitec 2.4GHz receivers to your transmitter.
Too Close: Less than 50Cm(18in)
Too Far: More than 5M(15ft)
Turn On the transmitter, and touch the “Yes”
in Transmitter
Touch the System menu.
Touch the “Spectra” icon.
Maxima Series Receiver Link (ID-Setting)
Maxima Series Receiver Link (ID-Setting or Bind)
- Link must be done within 15ft(5m) of the transmitter and receiver.
- Transmitter and receiver need to be at least 18in(50cm) from each other to link properly.
Note
18