HP 8360 L Series User Manual

10 MHz Freq Std Extrnl
Programming Codes
SCPI: ROSCillator[:SOURce] EXTernal
Analyzer: NONE
See Also
Ref Osc Menu
10 MHz Freq Std
Intrnl
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This softkey sets the swept CW generator to select the internal
10 MHz signal as the frequency reference. If the internal signal
is disconnected or not working properly, UNLOCK appears on the
message line of the display. An asterisk next to the key label
indicates that this feature is active.
SCPI: ROSCillator[:SOURce] INTernal
Analyzer: NONE
Ref Ost Menu
10 MHz Freq Std
None
Function Group
SYSTEM
Menu Map 8
Description
This softkey sets the reference oscillator to a free-run state, where
no frequency reference is used. An asterisk next to the key label
indicates that this feature is active.
Programming Codes
SCPI: ROSCillator[:SOURce] NONE
Analyzer: NONE
See Also
Ref Dsc Menu
T-2 Operating and Programming Reference

HP 8360 L Series Specifications

General

Brand	HP
Model	8360 L Series
Category	Inverter
Language	English