HP ProCurve 5400zl User Manual

■ ipv6 -- Configure various IP parameters for the VLAN(p. 244)
■ connection-rate-filter -- Re-enables access to a host or set of hosts that has been previously
blocked by the connection rate filter(p. 228)
■ monitor -- Define either the VLAN is to be monitored or not(p. 252)
■ name -- Set the VLAN's name (ASCII-STR) (p. 254)
■ protocol -- Set a predefined protocol for the current VLAN. (p. 266)
■ qos -- Set VLAN-based priority(p. 268)
■ tagged -- Assign ports to current VLAN as tagged ([ethernet] PORT-LIST) (p. 278)
■ untagged -- Assign ports to current VLAN as untagged ([ethernet] PORT-LIST) (p. 282)
■ forbid -- Prevent ports from becoming a member of the current VLAN ([ethernet] PORT-LIST)
(p. 234)
■ voice -- Labels this VLAN as a Voice VLAN, allowing you to separate, prioritize, and authenticate
voice traffic moving through your network(p. 283)
■ jumbo -- Labels this VLAN as a Jumbo VLAN, allowing you to pass packets up to 9220 bytes
in size(p. 246)
■ vrrp -- Enable/disable/configure VRRP operation on the VLAN(p. 284)
■ ip-recv-mac-address -- Associates a L3-mac-address with a VLAN(p. 243)
■ service-policy -- Apply the QoS/Mirror policy on the vlan (ASCII-STR) (p. 275)
■ [no] interface vlan VLAN-ID ipv6 access-group ACCESS-GROUP vlan
VLAN acl.
■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > track vlan
Usage: [no] vrrp vrid <VRID> track vlan <VLAN-ID-RANGE>
Description: Enable/disable tracking of VLANs for VR.
Multiple <VLAN-ID-RANGE> can be specied.
Next Available Option:
■ vlan-id-range -- Enable/disable tracking of specified VLANs for VR (VLAN-ID-RANGE) (p. 283)
vlan-id-range
■ [no] interface vlan VLAN-ID vrrp vrid < 1 to 255 > track vlan VLAN-ID-RANGE
Usage: [no] vrrp vrid <VRID> track vlan <VLAN-ID-RANGE>
Description: Enable/disable tracking of specied VLANs for VR.
voice
■ [no] interface vlan VLAN-ID voice
Usage: [no] voice
Description: Labels this VLAN as a Voice VLAN, allowing you to separate,
prioritize, and authenticate voice trafc moving through
your network.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
■ [no] interface svlan VLAN-ID voice
283© 2009 Hewlett-Packard Development Company, L.P.
interfaceCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English