HP ProCurve 5400zl User Manual

Description: Specify the source ip-address policy for the response pdu.
By default snmp response pdu will contain the ip address of
the active interface on which response will be sent. The default
behavior is in compliance to rfc-1517.
The no form of the command will revert to default behavior.
IP-ADDR -- ip-address specied will be used as the source ip
address in the snmp response pdu.
dst-ip-of-request -- Destination ip of the snmp request will be used as
the source ip address in the snmp response pdu.
loopback 0-7 -- lexicographically minimum congured ip address on the
specied interface will be used as the source ip
address in the snmp response pdu.
Next Available Options:
■ ip-addr -- IP Address for the source ip address field in the snmp response pdu. (IP-ADDR) (p.
618)
■ dst-ip-of-request -- Destination Ip address of the snmp request pdu will be used as the source
ip address in the snmp response pdu.(p. 616)
■ loopback < 0 to 7 > -- For the specified loopback interface, lexicographically minimum configured
ip address will be used as the source ip address in the snmp response pdu.(p. 619)
retries
■ snmp-server host IP-ADDR informs retries < 0 to 255 >
Specify the number of retries for informs.
Range: < 0 to 255 >
■ snmp-server host IPV6-ADDR informs retries < 0 to 255 >
Specify the number of retries for informs.
Range: < 0 to 255 >
snmp-authentication
■ [no] snmp-server enable traps snmp-authentication
Select RFC-1157 (standard) or HP-ICF-SNMP (extended) traps.
Next Available Options:
■ standard -- Send traps for Standard Authentication failures.(p. 620)
■ extended -- Send traps for Extended Authentication failures.(p. 617)
standard
■ [no] snmp-server enable traps snmp-authentication standard
Send traps for Standard Authentication failures.
timeout
■ snmp-server host IP-ADDR informs timeout < 1 to 21474836 >
Specify the interval between retries for informs, in seconds.
620© 2009 Hewlett-Packard Development Company, L.P.
snmp-serverCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English