LLDP-MED Remote Device Summary 101
Network Policy Information
This section describes the information in the network policy TLVs received in the LLDP-MED frames on this interface.
Media Application Type The media application type received in the TLV from the remote device. The application types
are unknown, voicesignaling, guestvoice, guestvoicesignalling, softphonevoice,
videoconferencing, streammingvideo, vidoesignalling. Each application type that is
transmitted has the VLAN ID, priority, DSCP, tagged bit status and unknown bit status.
The port on the remote device may transmit one or many such application types. This
information is displayed only when a network policy TLV has been received.
VLAN ID The VLAN ID associated with a particular policy type.
Priority The user priority associated with a particular policy type.
DSCP The Differentiated Services Code Point value associated with a particular policy type.
Unknown Bit Status The unknown bit associated with a particular policy type.
Tagged Bit Status Identifies whether the network policy is defined for tagged or untagged VLANs.
Inventory Information
This section describes the information in the inventory TLVs received in the LLDP-MED frames on this interface.
Hardware Revision The hardware version advertised by the remote device.
Firmware Revision The firmware version advertised by the remote device.
Software Revision The software version advertised by the remote device.
Serial Number The serial number advertised by the remote device.
Manufacturer Name The name of the system manufacturer advertised by the remote device.
Model Name The name of the system model advertised by the remote device.
Asset ID The system asset ID advertised by the remote device.
Extended PoE
This section describes whether the remote device is advertised as a PoE device.
Device Type If the remote device is a PoE device, this field identifies the PoE device type of the remote
device connected to the port.
Extended PoE PD
This section describes the information about the remote PoE powered device.
Required If the remote device is a PoE device, this field details the remote ports PD power requirement
in Watts.
Source If the remote device is a PoE device, this field details the remote ports PoE PD power source.
Priority If the remote device is a PoE device, this field details the remote ports PD power priority.
Field Description
To Next Page
Loading...
