Page 158 RADIUS Settings
Adding a RADIUS Server
To add a RADIUS server to the switch configuration:
1. Click Add.
The Add RADIUS Server page appears.
Figure 115. Add RADIUS Server Page
2. Specify the required information about the RADIUS server.
3. Click Apply to update the switch configuration.
Your changes take effect immediately but are not retained across a switch reset unless you click
Save Configuration.
Changing RADIUS Server Settings
To change settings for an existing RADIUS server:
1. Select the RADIUS server to configure.
2. Click Edit.
The Edit RADIUS Server page appears.
Figure 116. Edit RADIUS Server Page
To Next Page
Loading...
