Page 24 System Time Pages
System Time Pages
You click Setup Network > System Time to display the web pages for configuring the system clock,
SNTP client functionality, system time zone, and daylight saving time settings.
System Time
The System Time page displays the current time, time zone, and Daylight Saving Time settings, and
enables you to configure the time display format. To display the System Time page, click Setup Net-
work > System Time in the navigation pane, and ensure that the Clock tab is selected.
Figure 7. System Time Page
Table 4. System Time Fields
Field Description
Current Time
Time The current time. This value is determined by an SNTP server. When SNTP is disabled, the
system time increments from 00:00:00, 1 Jan 1970, which is set at bootup.
Date The current date.
Time Source The source from which the time and date is obtained:
SNTP—The time has been acquired from an SNTP server.
No Time Source—The time has been either manually configured or not configured at all.
This is the default selection.
Time Format Select 24 Hour (“military” time, the default) or 12 Hour to specify the time display format.
To Next Page
Loading...
Need help?
General