HTA HT2000H - Syringe Replacement Procedures

HT2000H_en_n.doc Page 160 of 167
12 Appendix B – Consumables
Warning
For the sample and reagents handling, see paragraphs 1.1 “Intended use and restrictions”
and 1.3 “Warning”.
12.1 Syringes
Syringe Type
Syringe Warmer
Assembly
HTA part
number
Volume
Description
Standard Version 1.93.841
3.21.027 1 ml Glass Barrel
3.21.025 1 ml Plunger
3.21.400 2,5 ml Glass Barrel
3.21.300 2,5 ml Plunger
3.20.400 5 ml Glass Barrel
3.20.300 5 ml Plunger
HT Version (availa-
ble only for use with
HT2000HT)
1.91.331
1.91.334 Needle (2pc)
1.91.342 2,5 ml Plunger
12.1.1 How to select the correct syringe type
(only for HT2000HT)
Look at the following table to check which kind of syringe you need according to the syringe
temperature you want to set.