HT2000H_en_n.doc Page 43 of 167
3 Installation
Warning
The autosampler must be located in a place that provides good ventilation.
The HT2000H/HT2000HT oven is equipped with a fan, which is used to assist temperature
stabilization and the cooling down of the oven.
This fan must not be obstructed as it may affect the operation of the unit.
Environmental temperature must be from 15°C to 35°C and relative humidity must be between
5-80% (not condensing). If these environmental conditions are not met, it may affect the
performance or damage the unit.
3.1 Unpacking and preliminary operations
Take care when unpacking the unit.
Check the integrity of the box before opening it to ensure it is not damaged. If it is, please inform
your local dealer before unpacking the autosampler from the box.
When the autosampler has been unpacked, check the autosampler itself and the accessories
provided (compare these with the packing list enclosed).
Ensure that everything listed in the packing list is in the box. If not, please advise your dealer.
Warning
Do not switch the autosampler on before it is correctly mounted on the bracket (see paragraph
3.3.1 “Autosampler installation on the mounting plate” to avoid the risk of
overturning.
To Next Page
Loading...