Need help?Do you have a question about the HTA HT2000H and is the answer not in the manual?
General| Brand | HTA |
|---|---|
| Model | HT2000H |
| Category | Laboratory Equipment |
| Language | English |
Defines the intended use, restrictions, and essential safety measures for operating the autosampler.
Explains warning symbols used in the manual and provides critical safety warnings for operation.
Details the applicable directives, standards, and general technical specifications of the autosampler.
Describes features exclusively available through the HTA Autosampler Manager software.
Provides a detailed overview of the main parts and features of the HT2000H/HT2000HT models.
Details the main components, sample rack, and control panel for the HT2100H model.
Illustrates the syringe location and describes the rear connection panel ports and their functions.
Describes the autosampler's moving parts and lists the components included in the tool kit.
Step-by-step guide for unpacking the autosampler and performing preliminary assembly operations.
Instructions for installing the autosampler on the mounting plate and setting the safety lock.
Details the electrical, purge line, and PC connection procedures required for setup.
Guides through the initial start-up process and PC software installation for the autosampler.
Explains how to view system parameters and access the main setup menus.
Details procedures for aligning injectors and installing the syringe assembly.
Covers manual motor control, system configuration, and advanced settings.
Describes how to program methods and sequences for the HT2100H using a PC.
Explains how to edit and set method parameters for HT2000H/HT2000HT models.
Details how to edit and set parameters for sequences and sequence steps.
Explains the functions of the keypad keys and status indicators on the HT2100H.
Describes the Home screen interface and basic operations like single injection.
Details how to perform single injections and automatic sequential runs.
Covers syringe purging procedures and loading/unloading sample vials.
Addresses common errors encountered during startup, method, and sequence reading.
Details errors related to parameter mismatches, missing alignments, and communication timeouts.
Provides guidance for troubleshooting analytical symptoms and mechanical errors.
Covers routine cleaning of racks, cabinets, and the incubation oven.
Provides detailed steps for replacing syringes in the warmer assembly.
Details septum replacement for the integrity tool and preventive maintenance items.
Guides through the process of uninstalling, packing, and shipping the autosampler.
Provides instructions for the proper disposal of the autosampler and its components.
Defines key terms and concepts related to headspace analysis and autosampler operation.
Lists available syringes, vials, caps, and septa, including selection guides.
Provides detailed information on GC and RS232C connectors and their pin assignments.
To Next Page
