Need help?Do you have a question about the HTA HT2800T and is the answer not in the manual?
General| Brand | HTA |
|---|---|
| Model | HT2800T |
| Category | Laboratory Equipment |
| Language | English |
Provides an overview of the HT2800T autosampler, its intended use, and restrictions.
Lists critical safety warnings before unpacking or using the unit.
Details the technical specifications including dimensions, weight, and electrical requirements.
Identifies and defines the main components and overview of the autosampler.
Explains the location of the syringe and how to access it.
Describes the rear connection panel of the autosampler unit.
Details the functionality and usage of the autosampler's touchscreen interface.
Provides a comprehensive guide to installing the autosampler system.
Details the procedure for mounting the autosampler onto the GC plate.
Guides on connecting the autosampler to a PC and installing the management software.
Instructions for installing optional accessories like pressure regulators and tools.
Explains how to view the current operating parameters of the autosampler.
Accesses various setup menus for configuring the autosampler.
Guides on aligning the autosampler with the GC injection port.
Allows adjustment of general autosampler settings like sound, light, and run parameters.
Explains how to create and edit methods for Headspace analysis.
Explains how to create and edit methods for Liquid analysis.
Explains how to create and edit methods for SPME analysis.
Explains how to create and edit sequences for Headspace runs.
Explains how to create and edit sequences for Liquid runs.
Explains how to create and edit sequences for SPME runs.
Describes the main interface screen and its two modalities: Standard and Quick Start.
Guides on setting up and executing automatic sample runs.
Describes how to switch between Headspace, Liquid, and SPME operating modes.
Addresses common errors encountered during the autosampler startup sequence.
Lists and explains errors related to incorrect method parameter settings.
Troubleshooting steps when an obstacle is detected during autosampler movement.
Explains errors arising from parameter mismatches between setup and methods.
Addresses issues affecting chromatographic results and sample analysis.
Details routine maintenance tasks for the autosampler's general upkeep.
Provides detailed steps for replacing the syringe in Headspace mode.
Instructions for replacing the SPME fiber within its holder.
Details the operations required to safely uninstall the autosampler from the system.
Instructions for repacking the autosampler and its accessories for safe shipping.
Defines technical terms related to the Headspace technique and system integrity.
Defines technical terms related to Liquid mode operations, including air gaps and SyringeID.
Lists syringes and sample vials recommended for Headspace mode.
Lists syringes and sample vials recommended for Liquid mode.
Lists fibers and washing vials recommended for SPME mode.
Details the pin functions and specifications for the optional RS232C connector.
To Next Page
