HT2800T_en_c.doc Page 11 of 275
1.3 Warning
Read the following warnings before unpacking or using the unit.
See paragraph 1.1 “Intended Use and Restrictions “ and be sure you understand it.
Read Declaration of CE Compliance enclosed with the autosampler.
Before removing the autosampler from the box, please carefully read paragraphs 3.1 “Unpacking
and Preliminary Operations” and 3.2 “Autosampler Assembly”.
Before switching the autosampler ON check the correct voltage.
Electrical Hazards. Every analytical instrument has specific hazards, so ensure you read and
comply with the following precautions.
Use only the power supply provided with the autosampler. The use of a different system could
cause damage to the equipment and/or compromise safety. There are no operator-serviceable or
replaceable parts inside the power supply. In case of failure, contact the Technical Assistance
Centre. Violations of these directives imply the immediate invalidation of the warranty and service
contract.
The supplied power cord must be inserted into a power outlet with a protective earth contact
(ground). When using an extension cord, make sure that the cord also has an earth contact.
Do not change the external or internal grounding connections. Tampering with or disconnecting
these connections could endanger you and/or damage the autosampler.
The product is designed and tested in accordance with international safety standards.
You do not need to make any changes to the electrical connections or to the chassis of the
autosampler in order to ensure safe operation.
Do not turn the autosampler on if you suspect that it has incurred any kind of electrical damage or
if it shows visible signs of damage. If, for any reason, the safety protections were
compromised or the autosampler shows visible signs of damage, disconnect the power cord and
contact a HTA representative. The power cord connector is considered the disconnecting device
of the product. Electrical damage may have occurred if the autosampler shows visible signs of
damage, or has been transported under severe stress.
To Next Page
Loading...
