HT2800T_en_c.doc Page 44 of 275
3 Installation
3.1 Unpacking and Preliminary Operations
Take care when unpacking the unit.
Check the integrity of the box before opening it to ensure it is not damaged. If it is, please inform
your local dealer before unpacking the autosampler from the box.
When the autosampler has been unpacked, check the autosampler itself and the accessories
provided (compare these with the packing list enclosed).
Ensure that everything listed in the packing list is in the box. If not, please advise your dealer.
Warning
The autosampler must be located in a place that provides good ventilation.
The HT2800T/HT2850T oven is equipped with a fan, which is used to assist temperature
stabilization and the cooling down of the oven.
This fan must not be obstructed as it may affect the operation of the unit.
To Next Page
Loading...
