HT2800T_en_c.doc Page 10 of 275
The operator must be trained to operate the equipment in accordance with the safety standards
for the laboratories. The autosampler does not have specific protection mechanisms against
substances that are corrosive, potentially infectious, toxic and radioactive or against other
substances that can be hazardous to health. However, when the autosampler is used, because
of the handled substances, the user could need to use individual protection measures such as
gloves, masks and goggles; the use of such devices must comply with the regulations currently
in force regarding the safety of testing laboratories.
The use of the autosampler for any technique invasive for humans or animals is explicitly
prohibited. The autosampler must be used only in the manner described in the usage
instructions. Any other use may affect the autosampler and operator safety.
HTA s.r.l. is not responsible for damage caused, even only in part, by improper use of the
autosampler, by unauthorized modification of it, by different or missing execution of the
procedures described in this manual, or by the use of the autosampler violating the applicable
laws and regulations.
The autosampler has been designed and tested in accordance with current safety standards.
1.2 Symbol Table
Please carefully read this table before using your autosampler. These symbols are used in this
manual.
Do not touch: action forbidden
Warning: check the manual
High voltage
Warning: indicates pinch, crush and cut hazard
Warning: indicates the possible presence of biological or hazardous substances
Hot surface
To Next Page
Loading...
