HTA HT2800T - 7 Operations; 7.1 Home screen

HT2800T_en_c.doc Page 162 of 275
7 Operations
7.1 Home screen
After the START UP procedure, the autosampler will move the turret to the central position, and
the touch screen shows the Home screen.
The Home screen is available in two modalities: Standard (see paragraph 7.1.1) and Quick Start
(see paragraph 7.1.2). The Quick Start modality is a simplified modality in which you can start
working by simply tapping “Start” (for details see paragraph 7.1.2). To modify the Home screen
modality, set the User Interface (see paragraph 4.2.6.3 “Setup configuration: Run “).
7.1.1 Home screen: Standard User Interface
Figure 142: Home screen: Standard User Interface
From here, it is possible to access the following functions:
Headspace mode:
• Single Injection: performs an injection from a specific sample vial (see paragraph 7.2);
• Automatic Run: performs an automatic cycle of injections from different sample vials
(see paragraph 7.3);
• Syringe Purge: flushes the syringe with gas (see paragraph 7.4);
• Load Sample Tray: opens the tray to load/unload the samples (see paragraph 7.7);
• Settings: accesses other autosampler functionalities and menus (see paragraph 7.9).